IFish Fishing Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
Where can a guy find some Zep alume?
I can't find any in the Eugene area.
Are there any other readily available
cleaners anyone might recommend?

Mahalo,
Surfbum
 

·
Registered
Joined
·
278 Posts
i just went thru this and found a product called aluminium brite , just wipe it on with a rag and spray it off with water. Then i used flintz polish and buffer wheel to polish to a mirror finish. you can do the whole boat in 4 or 5 hours , this is the first time i did this and was very pleased with the results. The aluminium brite takes all the sludge and water spotting off then you need to polish and or wax to protect the finish.You should be able to find this stuff at any retailer that sells wax and polish ,buffing wheels,if not i can give you the name of the company where i found it. good luck
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top