Saturday my oil-change reminder alarm started beeping. I tried the reset trick several times: stop motor, turn ignition off, turn ignition on, pull out MOB clip, pull kill switch out and release three times within 10 seconds. Never worked. What am I missing? Is there any other reason the oil-change warning would come on?
dakunah
Suzuki DF200AP oil change alarm won't reset
1 reading
If this isn't a typo, it could be your problem. Correct sequence is to turn key off, pull out clip, turn key on, pull kill switch 3 times.
I have a DF115 and the sequence says turn to on then pull the emergency stop button. See the attached photo of the instructions. I have a pen pointing to where the instructions start if not equipped with keyless start.
Now when I follow those instructions, the reset beep happens on the second pull. Not the third. I just did the 20hour reset. I hope it worked.
![Image]()
Sent from my iPhone using Tapatalk
Now when I follow those instructions, the reset beep happens on the second pull. Not the third. I just did the 20hour reset. I hope it worked.
Sent from my iPhone using Tapatalk
Got it figured. AP is 'fly by wire' digital controls, the kill-switch toggling doesn't work.
The sequence is:
Ignition off.
Ignition on.
pull MOB clip from kill switch.
push start/stop button 3x.
Really hard to find this in my manual. At least for me. Hopefully this saves someone else the headache.
The sequence is:
Ignition off.
Ignition on.
pull MOB clip from kill switch.
push start/stop button 3x.
Really hard to find this in my manual. At least for me. Hopefully this saves someone else the headache.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
