IFish Fishing Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
358 Posts
Discussion Starter · #1 ·
Has anyone out there used the Lure Coat/Dick Nite for painting spoons and spinners? What are your thoughts of this product? How did it work? Any help or information is appreciated.

[ 01-08-2004, 11:31 AM: Message edited by: Willow Drifter ]
 

· Registered
Joined
·
767 Posts
Willow Drifter,
Hi.
Yes, I've used the paint in question.
Results= well, is was O.K. i guess.
I have also used that new powdercoat paint
Results= Very nice on blades
Note of caution.....
You will need to scuff-up the surface of the area you wish to "paint". Otherwise the smooth finish on many spinner blades will cause the coating to chip of flake-off. There is also an oven "curing process" recommended for this product that makes it tougher than all get out.
It's great suff. You can mix and match colors fluorecents, glow in the dark and metallic flake clear-coat. The only thing is not being able to mask the blades-off really well if you want the paint only on certain parts of the blade. I'm sure it can be done somehow.
Good luck,
Ragnar
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top