How much weight were you dragging with that set up?

 

I had 10 oz. on so that will be substantially more when I am dragging 16 to 20 oz at Buoy 10.

 

I was just curious... Last year i had a couple custom rods built for the Admiral and i that were a hybrid Carbon/glass designed for 360's . They seemed a bit stiff in the tips with 6-8 oz lead dragging triangles on the bottom. But going up to 10-16 oz weight in heavy current is where they really shined.... I really like these things with a fish on them....Good back bone, and they bring the fish to the net easily without the rod folding in half.

I never have been fond of those noodle rods with medium action that bend the full length of the rod. I like that action in the tip that the fast action gives you, without loosing control at the rail. Sounds like you got a winner there! Kirk

 

Your experience dragging triangles was similar to mine but once the 360's were on it was a perfect. Good luck to us both.

 

I had bought a new Edge rod for salmon fishing just before I moved. Not sure I’ll ever get to fish it. Enjoy yours.

 

You can always return and put it to good use I am sure.

 

While we're talking Edge, does anyone have experience fishing the BWC HVR 764-1? I held one at the show and regret not buying it.

 

While we're talking Edge, does anyone have experience fishing the BWC HVR 764-1? I held one at the show and regret not buying it.

I have one and I like it a lot. I use it for hover fishing the Lewis and the Cowlitz for kings and coho


Sent from my iPhone using Tapatalk

 

I know this is a little old thread. But I have purchased 925. I’ll get it sometime in January 2024. Haven’t even gotten it yet and I’m looking at getting a 10-20 924 🤑🤑🤑

 

You'll love the 924, that's all I used last fall and it impressed the hell out of me. Like you, I'm waiting for the 925 to show up.

 

I too have put in an order for 2 new 360 pros and I am already chomping at the bit to try them out this spring. I ended up getting the 926 rods. I curse them for having such a fire sale and egging me on to get myself a present.

 

Buy one get one 45% off. Almost got me to bite. But a voice in my ear said life would suck for for a week if I was lucky. 😂😂😂

 

Just finished last night building the first of three matching Edge Pro 360 1066 blanks for my personal boat. Will report back on performance once we get fishing later this spring.
On a side note these un-sanded blanks are a bit more of a challenge when laying down thread wraps.

 

Just finished last night building the first of three matching Edge Pro 360 1066 blanks for my personal boat. Will report back on performance once we get fishing later this spring.

I put a few fish in Phil’s boat this fall with my factory built 360 1066. It is a lot faster action than my Lamiglas XCC965. Pairs well with Penn Fathom 2 line counter. Both rods catch fish.

 

Not sure about the Edge Rods it seems like most people like them !!!! I guess i'm old fashion, I'm fortune enough to have
15 HARRINGTONS custom built rods from ,trout to steelhead to salmon to sturgeon and i feel there is nothing better for me

 

If your wrapping the unsanded blanks, best advise I can give you is go up one size in thread diameter. It will help a ton!

 

If one were to want to get the ultimate steelhead/coho rod for bank fishing under a float or drift fishing, which Edge rods are supreme? I am thinking of treating myself to my first nice rod ever. I only own Okuma and Ugly Sticks.

 

1004- If you have to order it be prepared to wait many months despite what they may tell you...... I will never order another rod from them and would only buy it from their store in person but at this point there are better options without having to deal with them.
Great rods- Terrible customer service.

Jon Bonynge

 

I got a pile of the 12'6" 360 rods when they went on sale last May. Fished them from Mid August to the end of October ruthlessly. 10oz with the 360 flasher and I have fallen in love. I sure did like the 30% sale too

I really like my current Sockeye/Walleye rods or Id be in the market for another batch of rods (different models of course). I really like the quality. Most of my boat rods have been pretty inexpensive and so far I don't regret the upgrade.

 

Well, I’m not holding my breath, but it would be nice if I got it on time. I’d be OK with February March I’d be getting nervous.

 

I’ve been waiting for a refund on a cancelled order since the week before Thanksgiving.

 

Just to echo everyone else. Amazing rods but horrible customer service. I gave up after waiting for 6 months for my order and canceled. Took a few emails to get a refund. Overall not a positive experience.

 

I have the same rod and I am really happy with it so far.

 

Alot of positive and negative comments on this thread. I'm sure the delivery time varies depending on what rod model you're looking for and the demand for that particular model. When I ordered the rod on November 4th, they said it would probably be 2 -3 months before I would receive it which was fine by me as I was in no hurry. I picked the rod up yesterday, approximately 7 weeks after I ordered the rod.

 

I went in today and ordered a rod. They said it would be 8-10 weeks. But could be as soon as 3 if they are running a production on that blank.
They were very very nice and accommodating.
They took a rod to the bathroom and soaked the BWC to show how it gets tackier.

instant sale.

Can’t wait. Ordered a 1004. Might change that to a 964. Need to figure it out. I want an all around rod to float and drift.

 

Okay, I have to give up its not coming to me, What is BWC and what needs to be tackier?

 

I’ll add comment in the fact that during the third week of October I picked up an offer from Edge that I could grab any 10 blanks for $600. At the time of order it was noted that it could take up to 8 weeks for delivery so I knew what to expect. I received 8 of the 10 blanks with in a week delivered to my doorstep. I was back ordered two 1066 360 Pro’s which I got notice that they shipped today so in my mind they met their obligation.
I’ll also note that I was up at their pro shop a few weeks back to pick up some grip material and the guy running the store was more than helpful in helping gather my components.
I also wandered down to the blank and warranty department while there to check on my back ordered blanks. Introduced my self to the two gals who were running those departments and approached them with respect figuring you get more bees with honey. Both gals were very nice and went the extra mile to check on my order and provide an update. We joked a bit about how most times guys approach their inquiries with attempted intimidation and aggressiveness. My plan was to build a relationship that I’m confident will pay off over time.
In retrospect I knew my order would take up to 8 weeks and it took 9 so no big deal. I’ll chalk this purchase experience as a win as Edge got their delivery to me as committed and I picked up 10 blanks for $60 each. Winning.

 

Got an email today stating my 360 Pro 925 will be here Tuesday. Exactly 4 months from order to delivery. Based on the model and the demand for 360 Pro's, I'm happy with the process.

 

What was the cost for the factory made 360 Pro 925? I'm just curious.... I had mine built from blanks and swapped a custom built long bow for them.

Kirk

 

2 360 Pro rods ordered in November with their irresistible sale and I just received them yesterday. I ended up getting the 924 and 926. I'm extremely impressed with them and cannot wait to get them broken in!

Edge rods has a satisfied customer in me and I gladly support the best PNW made rod company!