Gonna switch to braid - www.ifish.net
The Oregonian's Bill Monroe!

Go Back   www.ifish.net > Ifish Fishing and Hunting > Bass and Panfish and Walleye Oh My!

Thread Tools Display Modes
Old 04-27-2005, 08:50 PM   #1
Join Date: Aug 2004
Location: PDX
Posts: 429
Default Gonna switch to braid

I think that I am finally going to start using braided line, ssssoooooooooooooo what are your likes and dislikes of different brands? For both spinning and casting reels.

Codfish is offline   Reply With Quote
Old 04-27-2005, 09:19 PM   #2
Join Date: Jan 2002
Location: Renton, WA
Posts: 657
Default Re: Gonna switch to braid

Stren Braid is good stuff. Don't forget to back off on the drag a bit, or at least no tighter. You might want to use a lighter rod, too. Brace yourself for the noise (Ugh!). C&R, Steve
sbasser is offline   Reply With Quote
Old 04-28-2005, 07:28 AM   #3
Ifish Nate
ExBassGuide's Avatar
Join Date: Sep 2004
Location: Milwaukie, OR. & Silver Lake Wa:-)
Posts: 2,893
Default Re: Gonna switch to braid

738 BASS 2008 / 714 BASS 2009
1064 BASS 2010 [email protected]
ExBassGuide is offline   Reply With Quote
Sponsored Links
Old 04-28-2005, 09:25 AM   #4
BuKuBass's Avatar
Join Date: Jan 2002
Location: Richland suburbs
Posts: 1,459
Default Re: Gonna switch to braid

"the fluorocarbonline is of a higher pound test than the braid"
Roger, why would you do that? One of the benefits of using a fluoro tip that's lighter than the mainline is that if you hangup, the leader should give first, saving the more expensive braid. I can see going with your rigging if you're having problems with the braid cutting thru the leader at the knot but with a uni/uni knot, I haven't had that problem.
Re: Stren Super Braid. I use the 30# for float'n'fly; the heavier test is easier to mend. 15/4 is perferred by many smallie addicts back East for "normal" applications and it's currently on sale at Cabela's.
IslandBass, If you're concerned about cost, try this for reducing your overall expense: Create two 75 yard segments from a 150 yard spool. Use cheap mono as backing on your reel so that when you've added the braid, the spooled is filled as you prefer. Use a flouro tippet-I like about 10 feet. After many knot tyings, break-offs, etc has reduced the leader length down to 2,3 feet, tie on a new one. Once your mainline is reduced to 60 yards or so and is becoming frayed, discolored, whatever, reverse it on your spool to expose the other end to the elements. I have some 8 year-old PowerPro on a backup reel that's still works fine.
"We let a river shower its banks with a spirit that invades the people living there, and we protect that river, knowing that without its blessings the people have no source of soul." -- Thomas Moore
BuKuBass is offline   Reply With Quote
Old 04-28-2005, 11:34 AM   #5
King Salmon
Join Date: Jan 2003
Location: Hillsboro OR
Posts: 12,076
Default Re: Gonna switch to braid

Buku nailed it.

I'd just add that if you stay with the Spectra lines you don't need to worry about the line rotting. Some of the other braids do break down. Power pro, my fav, is very cost effective, if you follow Buku's advise. I still use mono on spinning reels, except by bobber & jig rod, but I might try some braids this season.

My $.02
Owner/Operator: "I Can't Believe it's a Guide Service".....I miss you Dale!

"Today's the day"......Mel Fisher
Wreckless is offline   Reply With Quote
Old 04-28-2005, 08:48 AM   #6
Join Date: Oct 2004
Location: WA State
Posts: 201
Default Re: Gonna switch to braid

I currently have Spiderwire's Stealth spooled on my curado which is also a braided line. I chose it over stren superbraid (which I also plan to try too) because it came ith 25 yd of more line and it was cheaper too.

Seems very strong and has good abrasion resistance
Smaller diameter compared to mono

I had to be conscious of ensuring the line doesn't wrap around the rod's tip. It is no longer an issue but every once in awhile now it happens

The line can "dig" into itself making you casts come to a dead stop. Heard it can happen with Stren too. I've heard Reel Magic alleviates this so I'll be buying some too

The just is still out for me. I've only had it on for about a week and I haven't gone fishing with it yet, unless you want to include Cul de Sac casting, pitching and flipping :grin:.
"The defintion of insanity is doing the same thing over and over and expecting a different result." - A. Einstein
IslandBass is offline   Reply With Quote
Old 04-28-2005, 09:14 AM   #7
King Salmon
Hunt'nFish's Avatar
Join Date: Feb 2004
Location: Beaverton,OR
Posts: 14,157
Default Re: Gonna switch to braid

Well.... that's a good question. I've tried them all And here are my thoughts....

My considerations are price, line longevity, and performance. I don't care for braids on certain spinning reels. The looser (non-coated) braids tend to twist up pretty bad even w/ swivels. But I have to admit my spinning rigs are used mainly to throw light inline spinners like roostertails and this really twists the braid. Coated lines like the Spider-Wire Stealth & Power Pro don't twist as bad. I've switched reels to one w/ a better bail and roller design and it doesn't seem to twist as bad. I also switched swivels to a higher quality one.
On bait casters I love 20-30lb braid! I don't use a mono-leader either. Doesn't seem to matter as they are so focused on the lure action than the line.
However, I do like to use a 2-3ft mono leader when throwing tubes and senko w/ the spinning rod.

Tuff-Line sucks, it goes flat and ribbons. Good news is you don't find it much anymore anyway. And they've continously improved it into Tuff-Line Plus (which was better) and finally into Tuff-Line XP, which I think is a pretty good braid. I use 20lb on my bass rods and 30lb on my walleye/steelhead rods.
I also have a lot of Spider-Wire both Original (non-coated) and Stealth (teflon coated). I primarily use this on my bigger rods & reels for steelhead, salmon and my off Shore rigs for bottom fishing. Depending on the application and real size (theirs about a 2lb differance in diameter between coated & uncoated) I may give up the coating in favor of line capacity. For instance, I have a alum framed Pinnicle Baitcaster w/ flipping button that use for steelhead, I went with "Original" (uncoated) 30lb Spiderwire in order to get a full 150yds on it w/o dropping down to 20lb. The uncoated line also casts farther w/ light lures, but tends to backlash a bit more.

Stren Super Braid is one I've just tried on a Penn 321GTI halibut reel. It's uncoated and wolven in a square shape. I was trying to get a full 300yds of 80lb on that reel so I could reach even the deepest spots for halibut. 300yds = 900ft and I've fished 750ft with it so far and boated 4 last year. It seems to be doing the job just fine.

But we don't care about offshore reels and lines!!!
My opinion is this...
Start w/ 20lb Stealth first, I think it's about the cheapest right now anyway. Then try 20lb XP and finally 20lb Power-Pro. Or set up 3 rods w/ each and you decide which you like better. I think Stealth is stronger, than XP.... no, no I KNOW it's stronger. PP is maybe even slightly stronger yet, but it cost a bit more.
All will last 2-3 seasons before needing to be flipped around on the reel. It has no memory, smaller dia = more line capacity (important for steelhead guys), is tough as nails, excellent abrasion resistance, lasts 5-10x longer than mono, and now is about the same cost as good mono used to be. And about 3x stronger for the same diameter. It's a win/win all the way around!

Yes braid has changed everything. Nice small comfortable bass reels can now hold enough line of suitable strength to be used for larger gamefish. Now we're seeing alum frames replacing composite, and beefed up drag systems (ie. Quantum PT) being developed to address this evolution.

My goal this year is to use my alum framed Pinnicle for offshore silvers, perhaps even TUNA! if the opprotunity presents itself. Yes, I'm expecting to smoke it! But I just gotta try, just to see if it can be done.

Whew, that was much longer than I expected!
Did I mention I LOVE BRAID!!!
Hunt'nFish Trophy Pics
Hunt'nFish is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Cast to

All times are GMT -8. The time now is 08:27 AM.

Terms of Service
Page generated in 0.29686 seconds with 22 queries