Spinner blade?

[Robert]

I was wondering if anyone knows where to find some hard to find spinner blades? The first blade is a hammered blade blade that is hammered on both sides. The back side is half nickel and half brass. The front side is a rainbow spinner. I have seen the blades on some dudes spinner but was unable to find them.
The other blade is harder to explain. I have a couple but want more. There blades are hammered from the back side going foward. Only the punch/hammering is a large diamond. There are about 8 diamonds on it. It is a half copper and half nickel blade.
Thanks Robert

[ 11-25-2002, 03:03 PM: Message edited by: ****** ]

[HOGTIDE]

You might be talking about the CV-ClearwaterFlash Blade. A beautiful thing that is hammered on the inside with a variety of finishes and paint on the outside. CV-6 & CV-7 are favorites of the Rogue River Regulars. I think Luhr Jensen now owns and distributes the CV line.

Whatever happened to all of the standard "nice" blades.....Backmores, Lucky R's, Cascades, etc? To get a decent blade, lately, you have to buy a "Toman" or a "G-Spot" which are basically the old blades with a 200%-300% mark up.

Fishermans Marine Supply is currently marketing a line of really shiney, thin looking, diamond hammered blades . This might be the other style you have been seeing around.

[Robert]

I have tried BC for the blades and they were going to try to get some blades like that but last time I checked they had not.

Fishermans has a diamond punched blade but no the one I mean. There diamond punch is really shallow punch and all over. The ones I want have about 8 total punches. Who has the CV line? The expensive blades are annoying but you know its bad when you go to everey bead shop in towm to get fire polished and fiber optic beads. If you use wedding band rings it even more expensive.

[NEUTRON]

Check this out.

http://www.jannsnetcraft.com/default.asp?p=100