Spray in bed liner??

fish assassin · 01-23-2003, 06:48 AM

Anybody got any suggestions of where I can get a good spray in
bed liner for my new Pick-me-up truck?? Preferably in Hillsboro/
Aloha area or Newberg/McMinville area.

Pros or cons about any certain type?

TIA,
-assAssin-

[ 01-23-2003, 10:25 AM: Message edited by: crabbait ]

WaterDog · 01-23-2003, 06:59 AM

I believe Lafayette AutoBody does it 1-800-222-8230

CLICK HERE

fish assassin · 01-23-2003, 07:34 AM

Thanks Waterdog ...

-assAssin-

TheRogue · 01-23-2003, 07:42 AM

I got mine done at Lafayette Autobody. They did a really good job. I had heard they had some problems at first getting it just right, I guess that's understandable. I've had mine a year now, no chips, scrapes, etc. No peeling off the edges, either. They removed all hardware, nuts, bolts, etc, and sprayed, then replaced the hardware. Looks really sharp.

They use "Custom Lining" which is one of the hard surface spray-ons....like Line-X. The other type is pretty soft, like Rhino. Depends on what you're doing with it. My buddy did Rhino in the bow of his boat, really nice for kneeling on, pulling anchor, etc.

TR

fishchaser · 01-24-2003, 04:53 PM

E-mail STZII, He lives in Hillsboro, and has had his truck bed Rhino lined, and he had the front bow of his boat and trailer Rhino lined. He loves it, and would never buy anything less (Line-X)

Remember, YOU GET WHAT YOU PAY FOR!

DAB · 01-24-2003, 05:21 PM

I have Rhino liner in my truck, the shop that did it did not do a real good job of trimming after spraying it on, so I will not recomend them , Lets just say it was the shop just east of Gresham on HWY 26,
As the product goes it is great , If you want NON SKID check into this product very ,very non skid.
DAB

Re:Play · 01-24-2003, 05:51 PM

I have a 3/4 ton work pickup as does my son. We both have Line-x liners and are very pleased with them. We throw tools, hammers, crow bars, rocks etc on them, and have not had any problems. They are not as skid resistant as Rhino, but if you ever load and unload anything heavy and want to slide it to the front of the bed, Line-X is good. It is not as slick as the plastic liners so boxes do not slide around. Good luck

dawhunt · 01-25-2003, 02:07 PM

Don't get ARMA !!!!
Bob

Jettin' Fool · 01-25-2003, 04:02 PM

Any guess to how much $$ it would be to do the front of a sled? My NR has that rough finsh that is murder to kneel on when wearing shorts,

Thanks
Fool