IFish Fishing Forum banner

Old Merc 1150 Tilt Trim Problem

741 views 0 replies 1 participant last post by  rip n lips 
#1 Ā·
I posted this on the motor tech board but this board gets alot more views and I kinda need to figure this out asap so I can get my boat out of the middle of the street. The trim harness from the switch has a booted plug on the end that connects to the trim unit. It has 3 male spades and simply plugs in. Before the rubber boot there is 2 wires with female adapters that branch off. everything came un plugged...I got the main plug back in and my tilt down works, but the 2 wires (blue and purple) come from my tilt/trim switch up arent. I don't know where they plug into :shrug:.
Now my engines stuck in the down position and I can't tow it anywhere to have anyone look at it...
 
See less See more
2
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top