Pole Barn Shop.

Gundog · 07-17-2008, 09:29 PM

I am considering a change of residence my current house and shop are too small so we have been looking for houses with shops in Vancouver / Brush Prarie area. It seems we either like the house or the shop but never both. I am thinking of just getting the house we want then build a 50 x 60 shop pole barn. Anyone know what it would cost to build one? I have read a couple posts lately about guys building them so what kind of Sq Ft price are we talking?
Thanks Mike

Something Good · 07-18-2008, 05:02 PM

Pick up a copy of the nickel ads. Lots of builders in there with prices listed.

WiskeyJaR · 07-19-2008, 03:47 PM

Farther-N-law had a 50x75 foot pole barn built this past spring, Cement floor, Tin roof and rafters, 20ft poles. cost him 15000 and he did half or more of the labor.

djb · 07-19-2008, 03:58 PM

I did a 24x30 web steel shop two years ago. I spent about 20k from start to finish.

Gundog · 07-19-2008, 05:32 PM

Thanks for the info anyone know the going price for concrete per yard? I picked up a nickel add but only saw one outfit in Salem listed and they had kit prices. I don't think I want to build it myself I would probably have the thing erected, insulated and concrete poured then I will light and electrify it myself.
Mike

Bobberman · 07-21-2008, 05:52 PM

this winter is was around $100 a yard.

tikkahunter · 07-21-2008, 07:15 PM

i work for a contractor that is building one now that is 75x 40 i beleave with a wall in the middle and concrete on half i think it is arounnd 40 built by him hwith the electric and water brought into it

Uglygreen · 07-22-2008, 04:34 AM

Quote:

Originally Posted by Bobberman

this winter is was around $100 a yard.

Pole footings or slab? Just the concrete itself or concrete poured in place and finished? What part of town?

PM me for more info.

- Brad

NEUTRON · 07-22-2008, 05:19 AM

M&W, Long Bros are couple places you might check with. Mine was done about 2 yrs ago, 36x48 and I finished up a little over 20k with concrete and roll up doors.

Bobberman · 07-22-2008, 06:36 AM

Quote:

Originally Posted by Uglygreen

Pole footings or slab? Just the concrete itself or concrete poured in place and finished? What part of town?

PM me for more info.

- Brad

That was for concrete only

Rustyoar · 07-22-2008, 06:41 AM

There were a couple threads about this a while back try a search "Pole Barn" there were some good numbers presented. I know that the prices change often on the kits, by the time we had the money ready for ours he said he had to re-bid it cause the prices had changed in the lumber/sheet metal.

http://www.ifish.net/board/showthrea...ight=pole+barn

http://www.ifish.net/board/showthrea...ight=pole+barn

Gundog · 07-22-2008, 08:23 AM

I do not have a location at this time we are in the process of looking for a new place and I just wanted to know what it would cost to add the shop. When and if I find something I will be looking for a contractor and some more exact quotes. I am just trying to get a ball park price now and I think I have that so thanks to all the information.

Quote:

Originally Posted by Rustyoar

There were a couple threads about this a while back try a search "Pole Barn" there were some good numbers presented. I know that the prices change often on the kits, by the time we had the money ready for ours he said he had to re-bid it cause the prices had changed in the lumber/sheet metal.

Thank you for the advice as a moderator I am quit familiar with the search function. I did a search to start with but just like your comment about the price change I was looking for something very recent price wise.

Mike