 |
06-16-2008, 08:41 PM
|
#1
|
|
King Salmon
Join Date: Oct 2001
Location: mcminnville area
Posts: 7,946
|
Metric bolts
I am looking for some help. I need to find a dozen metric bolts size m10x 1.25 pitch x180mm. Can someone help me find them? I only need 12. I have searched the internet to no avail. Does someone here work with bolts? Thanks in advance.
__________________
Happiness is a large gut pile!
|
|
|
|
06-16-2008, 09:11 PM
|
#2
|
|
Ifish Nate
Join Date: Mar 2008
Location: Hillsboro, OR
Posts: 2,425
|
Re: Metric bolts
mcmastercar is your friend. mcmaster almost always ships the same day.
Last edited by veilside180sx; 06-16-2008 at 09:22 PM.
|
|
|
|
|
06-16-2008, 09:20 PM
|
#3
|
|
Chromer
Join Date: Nov 2003
Location: Independence, OR
Posts: 716
|
Re: Metric bolts
Cascade Nut and Bolt in Salem. SG
__________________
Team 81-6-1 Team PNW Jigs
No Siletz River dam! No Siletz River reservoir!
Period!
|
|
|
|
06-16-2008, 09:23 PM
|
#4
|
|
King Salmon
Join Date: Oct 2001
Location: mcminnville area
Posts: 7,946
|
Re: Metric bolts
Email sent. I will see what they have tomorrow. Thank you
I will call the one in salem tomorrow and see what they have too!! Thanks guys 
__________________
Happiness is a large gut pile!
|
|
|
|
|
06-16-2008, 10:03 PM
|
#5
|
|
Sturgeon
Join Date: Jun 2004
Location: Corvallis
Posts: 4,175
|
Re: Metric bolts
Robnett's hardware in Corvallis has a room full of bolts and I think they have those. I KNOW they have 10Mx 1.25 pitch. call them at
Paul
__________________
Until you have the courage to lose sight of the shore, You will not know the terror of being forever lost at sea.
TEAM OPB and looking for chances at salmon, Halibut and Tuna!!
Last edited by Don Becker; 06-17-2008 at 06:22 AM.
Reason: Removed non-sponsor contact information. Don Becker, ifish staff
|
|
|
|
|
06-17-2008, 05:22 AM
|
#6
|
|
King Salmon
Join Date: Oct 2001
Location: mcminnville area
Posts: 7,946
|
Re: Metric bolts
Quote:
Originally Posted by veilside180sx
mcmastercarr.com is your friend. mcmaster almost always ships the same day.
|
I got an email back and they said that they could not provide the bolt requested. Next on the list.
__________________
Happiness is a large gut pile!
|
|
|
|
|
06-17-2008, 05:31 AM
|
#7
|
|
King Salmon
Join Date: Oct 2001
Location: mcminnville area
Posts: 7,946
|
Re: Metric bolts
body lift bolt for 92 isuzu rodeo.
question, If I were to get a tap, and rethread the holes to m10 x 1.50 would it work? Also, is the m10 = to 3/8" or 5/16"?
__________________
Happiness is a large gut pile!
|
|
|
|
|
06-17-2008, 05:45 AM
|
#8
|
|
Ifish Nate
Join Date: Mar 2008
Location: Hillsboro, OR
Posts: 2,425
|
Re: Metric bolts
I flunked out looking on Fastenal's site (which is local to PDX), and I don't think Grainger carries it either.
|
|
|
|
|
06-17-2008, 06:27 AM
|
#9
|
|
Sturgeon
Join Date: Jan 2004
Location: Toledo Wa
Posts: 4,577
|
Re: Metric bolts
Fastenal ?
|
|
|
|
|
06-17-2008, 06:38 AM
|
#10
|
|
King Salmon
Join Date: Jan 2001
Location: Canby, Oregon
Posts: 6,050
|
Re: Metric bolts
Parkrose Hardware on Sandy Blvd. They have always had those hard to find nuts/bolts I've been looking for. I've even driven all the way from Canby to their store because they had what I was looking for or could get it.
__________________
Do your part, join a fisherman's advocacy group and be involved.
Team Northwest Steelheaders
Team Beavers
|
|
|
|
|
06-17-2008, 07:06 AM
|
#11
|
|
Tuna!
Join Date: May 2007
Location: Washington
Posts: 1,791
|
Re: Metric bolts
You might send Vancouver Bolt & supply an email to see if they have them. I have had them mail me fasteners before.
|
|
|
|
|
06-17-2008, 07:10 AM
|
#12
|
|
Steelhead
Join Date: Oct 2003
Location: Albany
Posts: 297
|
Re: Metric bolts
M10 = .3937 so it is a littler bigger than 3/8", the problem is that M10x 1.25 is a fine threaded bolt and i dont see that they make that length for that i only found some in titanium at 30.00 bucks a piece.
im not sure you can really retap it because the tap drill size for a M10 x 1.25 is 8.8mm and the tap drill size for a M10 x 1.50 is only 8.50mm which is smaller and i dont know if it would get you the meat for the threads you need.
Quote:
Originally Posted by sliverslinger
body lift bolt for 92 isuzu rodeo.
question, If I were to get a tap, and rethread the holes to m10 x 1.50 would it work? Also, is the m10 = to 3/8" or 5/16"?
|
|
|
|
|
|
06-17-2008, 07:40 AM
|
#13
|
|
Ifish Nate
Join Date: Jun 2004
Location: Troutdale, OR
Posts: 2,878
|
Re: Metric bolts
I usually get my stuff from Tacoma Screw in Portland or as someone else mentioned Parkrose Hardware. Last time I went in for an odd bolt they cut the threads I needed for me.
__________________
Due to lack of interest tomorrow has been cancelled.
"If you see a good fight get in it" Reverand Vernon Johns
|
|
|
|
|
06-17-2008, 09:27 AM
|
#14
|
|
Tuna!
Join Date: Jul 2007
Location: Culver, OR
Posts: 1,127
|
Re: Metric bolts
I have never been to Robnett's without finding what I was looking for. Might be worth a call.
__________________
Do or Do Not there is no try. -Yoda
|
|
|
|
|
06-17-2008, 12:14 PM
|
#15
|
|
Chromer
Join Date: Jun 2000
Location: Newberg, OR
Posts: 847
|
Re: Metric bolts
Try Portland Screw Company,
I'm a mech engineer and use these guys all the time for hard to find metric and SAE fasteners.
__________________
It's not how you do it, it's how you look doin' it.
Team crappy coffee
Last edited by Don Becker; 06-17-2008 at 06:01 PM.
Reason: Non-sponsor contact information removed. Don Becker, ifish staff
|
|
|
|
|
06-17-2008, 01:02 PM
|
#16
|
|
Sturgeon
Join Date: Jun 2004
Location: Corvallis
Posts: 4,175
|
Re: Metric bolts
Quote:
Originally Posted by wthr4d
Robnett's hardware in Corvallis has a room full of bolts and I think they have those. I KNOW they have 10Mx 1.25 pitch. call them at
Paul
|
since Im not allowed to give you their phonenumber I called them for you and they have the M10x1.25 but only to 100mm length. good luck.
paul
__________________
Until you have the courage to lose sight of the shore, You will not know the terror of being forever lost at sea.
TEAM OPB and looking for chances at salmon, Halibut and Tuna!!
|
|
|
|
|
06-17-2008, 01:13 PM
|
#17
|
|
Chromer
Join Date: Jan 2007
Location: Portland
Posts: 935
|
Re: Metric bolts
I always have good luck finding stuff like this at Winks Hardware in SE Portland.
|
|
|
|
|
06-17-2008, 03:06 PM
|
#18
|
|
King Salmon
Join Date: Apr 2002
Location: Redd
Posts: 9,827
|
Re: Metric bolts
Could only find them to 140mm, would all thread with a nut welded on work? Mcmaster.com has that, as do many of the mentioned outfits. That's what works for me as bolts over 1 1/2" only come so long.
__________________
Tight lines
Last edited by Chrome Bumper; 06-17-2008 at 03:13 PM.
|
|
|
|
|
06-17-2008, 03:13 PM
|
#19
|
|
Tuna!
Join Date: Dec 2002
Location: East County
Posts: 1,261
|
Re: Metric bolts
Winks in Portland. Something like SE 2nd and Stark
|
|
|
|
|
06-17-2008, 09:02 PM
|
#20
|
|
Steelhead
Join Date: Jun 2008
Posts: 123
|
Re: Metric bolts
mcmaster carr, 1/3 the price of parkrose. Good online website about 3 days from order to door step.
|
|
|
|
|
06-17-2008, 09:10 PM
|
#21
|
|
King Salmon
Join Date: Oct 2001
Location: mcminnville area
Posts: 7,946
|
Re: Metric bolts
Quote:
Originally Posted by Loner
mcmaster carr, 1/3 the price of parkrose. Good online website about 3 days from order to door step.
|
mcmastercarr said they could get them.
__________________
Happiness is a large gut pile!
|
|
|
|
|
06-18-2008, 02:05 PM
|
#22
|
|
King Salmon
Join Date: Oct 2001
Location: mcminnville area
Posts: 7,946
|
Re: Metric bolts
Cascade nut and bolt found them!!! They are back east and are going to cost me 8.50 each. I am only going to get the 6 I need to do the back end of the truck where they have to screw in and in the front I am going to go up to 7/16 bolts and lock nuts. Thank you guys for all the info.
__________________
Happiness is a large gut pile!
|
|
|
|
|
06-18-2008, 03:16 PM
|
#23
|
|
Ifish Nate
Join Date: Feb 2006
Location: Portland OR
Posts: 3,469
|
Re: Metric bolts
Beaver bolt?
__________________
Practice Catch and Release on All Sizes of Sturgeon
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
sliverslinger
