Kicker Motor Mount

TeganTunaDog · 07-09-2007, 03:54 PM

I have a 2001 2101 Striper with an Outboard, I want to mount my Yamaha T8 25" Kicker on it. Does any one know of a Fixed mount Brackett.
I don't need a Adjustable Motor Brackett like a Garelick. Thanks

fishingls · 07-09-2007, 07:50 PM

Best bet is to have a shop build one from aluminum. Your boat will require somewhat of a custom bracket with the angles set correctly for the kicker.

Duckwheat · 07-09-2007, 08:04 PM

I bought one that was prefabbed from Tristate marine here in Nampa. Very well made and solid. I have my T8 hanging on it.

Friends don't let friends buy Garelick Brackets.

Duckwheat

Hunt'nFish · 07-10-2007, 04:50 PM

Doesn't the GradyWhite Dealer offer a nice alum kicker mount that is two plates with a section of 8" alum pipe welded between them???

GRUPYGROUPER......who made that mount??
Hunt'nFish

Fsh2Max · 07-14-2007, 01:52 PM

Remote Troll makes a very good bracket. I have one on my Striper 1851.

Moldy45 · 07-18-2007, 11:50 PM

I have seen what you want right here at seastriper

TeganTunaDog · 07-19-2007, 06:53 PM

[quote=Moldy45;1598787]I have seen what you want right here at seastriper.

I saw a few on this site. My issue is the trim tabs stick out 9 inches from the transom so the bracket needs to stick out to for the shaft to clear. It really sucks, Not sure why seaswirl mounted them there.

vudo · 07-19-2007, 07:18 PM

I had the same problem with the trim tabs you do so your best option is to make one yourself or have a machine shop make one for you if you don't have a welder. I bought stainless at a scrap yard and made one for less than $100 in material and 1 full day of cutting/welding/drilling. The results - 13 lbs of extra weight, but indestructible compares to anything you can buy.

ReadyPro1 · 07-20-2007, 05:30 AM

This is a high thrust bracket from Adventure Marine . I put one on my boat this fall with a Yamaha T8.

No bounce and its rock solid its made out of aluminum and is powder coated to boot.

__________________

1999 241 Pro-line

Quote:" Don't get me wrong I like cats I just can't eat a whole one"

TeganTunaDog · 07-24-2007, 04:46 AM

Quote:

Originally Posted by ReadyPro1

This is a high thrust bracket from Adventure Marine. I put one on my boat this fall with a Yamaha T8.

No bounce and its rock solid its made out of aluminum and is powder coated to boot.

__________________

1999 241 Pro-line

Quote:" Don't get me wrong I like cats I just can't eat a whole one"

Looks good Could you post a picture of your Install so I could see what it looks like? Thanks alot Tunadog

ReadyPro1 · 07-24-2007, 05:15 AM

Quote:

Originally Posted by TeganTunaDog

Looks good Could you post a picture of your Install so I could see what it looks like? Thanks alot Tunadog

I will get a few posted tonight for you.

ReadyPro1 · 07-24-2007, 07:00 PM

Here you go they make several different brackets for all kinds of applications look them up on the web adventuremarine.