Recovered a nice Penn, older Long Beach model, someone had replaced the original spindle with a plastic one but there is quite a bit of greening corrosion on the base and some on the pillars - any suggestions what I might use with elbow grease to remove ? Thanks.
__________________
Go Out, Run Lines Deep, Hook 'em Hard, Reel 'em in to Keep ... reads like Poetry doesn't it?
for really tough salt intrution soak in vinager. Caution, soak for a few minutes and watch the componenets...if there are chrome parts a 1 hour soak will remove the chrome. Try the brass brush first.
I hope you mean ss wool as the iron deposits will start to rust again rite away. Also since I started using products like Corossion X which I learned about, here on this forum, I don't have near the problems.
Thanks to those who pass on Valuable information.
__________________
Formerly Wet Fly
The Lady Irish
Now a Tuna Captain
Morrage location Newport
Boat lady Irish
Remove Corrosion from Reel ...
Robalo Bill
for really tough salt intrution soak in vinager. Caution, soak for a few minutes and watch the componenets...if there are chrome parts a 1 hour soak will remove the chrome. Try the brass brush first.
Linear Mode
