Fish Finder Help

[Phunybonz]

I bought a Hummingbird LCR 4-ID at a garage sale. It did not come with manual and I will get ahold of the factory for a replacement. However, I would like to know if anyone could help with the transducer location. I would like to do it only once and can't wait for the manual to arrive. Yes, I am impatient, but the fish are getting away.

[Doubletake]

Mount the transducer on the transom to one side or the other, 1' minimum from your motor.(make sure the wash doesn't interfere with the signal) Set the transducer flush to 1/8" below the hull, start with flush lower it if you don't get a clear signal on plane. Also set the transducer flat or tipped down slightly if getting interference while on plane.

Make sure you pick a spot not behind rakers or a row of rivets or anything on the hull that will cause turbulence. The turbulence will show up on your screen. Good luck

Doubletake

[Pilar]

Phunybonz, I had one of those a while back. It was a good thing until I dropped it off the back of my boat. I still have the temperature/speed sensor. E me if you want it. The bend is your friend!