Remington 3200 - www.ifish.net

Go Back   www.ifish.net > Ifish Fishing and Hunting > Ifish Hunting

Reply
 
Thread Tools Display Modes
Old 12-23-2005, 10:55 AM   #1
Bait Bucket
King Salmon
 
Bait Bucket's Avatar
 
Join Date: Jul 2003
Posts: 9,591
Default Remington 3200

I know this is going to be a long shot but does anyone on here remember the receiver modifications on old production 3200 guns, and can point me to some illustrations? I use to own one many years ago and sold it. Now I think Iíve found a NIB International Live Pigeon Grade gun, the owner doesnít know what to look for and it would or could make a big difference in my offer. Any assistance would be appreciated.

Thanks

BB

Bait Bucket is offline   Reply With Quote
Old 12-23-2005, 11:38 AM   #2
baltz526
King Salmon
 
baltz526's Avatar
 
Join Date: Jan 2005
Location: lapine oregon
Posts: 18,563
Default Re: Remington 3200

http://remington.custhelp.com/cgi-bi...er/std_alp.php try here
__________________
OHA LIFE MEMBER, LAPINE OREGON. the hunt begins. http://www.oregonhunters.org/ To join the most effective hunting rights & habitat group in Oregon, Click on the OHA link.
baltz526 is offline   Reply With Quote
Old 12-23-2005, 11:47 AM   #3
baltz526
King Salmon
 
baltz526's Avatar
 
Join Date: Jan 2005
Location: lapine oregon
Posts: 18,563
Default Re: Remington 3200

this is the remington sevice rep in oregon Custom Gunsmith

Address: 1033 Elizabeth St.

City/State/Zip: Eugene OR, 97402

Phone: 541-689-1687
__________________
OHA LIFE MEMBER, LAPINE OREGON. the hunt begins. http://www.oregonhunters.org/ To join the most effective hunting rights & habitat group in Oregon, Click on the OHA link.
baltz526 is offline   Reply With Quote
Old 12-23-2005, 12:52 PM   #4
billc_sbio
Sturgeon
 
billc_sbio's Avatar
 
Join Date: Apr 2002
Posts: 4,150
Default Re: Remington 3200

When you break open the gun, or remove the barrels, IF the gun's had the mods, you'll see a pair of counterbored holes with Allen Cap Screws down at the bottom of the recoil plate/face, one on either side.

If I recall correctly, those "mods" were included as "standard production" by the time the International Live Pigeon guns came out. I'm pretty sure that the Live Pigeon guns were some of the last 3200s to be made, and the mods must have shown up about 4-5 years earlier.

__________________
(If you're doing it "right" you "talk to" Ducks!)
billc_sbio is offline   Reply With Quote
Old 12-23-2005, 01:44 PM   #5
snit
Tuna!
 
Join Date: Aug 2002
Location: Wenatchee, Wa
Posts: 1,411
Default Re: Remington 3200

Like what billc said....while looking at the breech face, there'll be an allen head on either side of the bottom firing pin. Also, a dot (.) will be right before or after the serial number that's stamped on the bottom of the receiver. If it doesn't have this, the upgrade was (a couple of years ago) about $500.00 plus shipping.

I'd love to see pics of a pigeon grade. I didn't know that existed in a 3200. A 3200 was one of the few models I never owned during my 17 years of trapshooting. Remington always put such pretty wood in their trap grade guns. A $300.00 870 TB had nicer wood than most of my Perazzi's???
__________________
...."the clock looked at me just like the devil in disguise".......
snit is offline   Reply With Quote
Old 12-23-2005, 02:03 PM   #6
Bait Bucket
King Salmon
 
Bait Bucket's Avatar
 
Join Date: Jul 2003
Posts: 9,591
Default Re: Remington 3200

Thanks fellas. This might be a winner for me if this deal goes thru. Iíve been pretty much a K-gun shooter and I just couldnít remember the 3200 mod. If this is what I think it is, itís choked X-full/X-full and that will give Briley so much room to work with. It gets me excited thinking about it.
Bait Bucket is offline   Reply With Quote
Old 12-23-2005, 02:13 PM   #7
billc_sbio
Sturgeon
 
billc_sbio's Avatar
 
Join Date: Apr 2002
Posts: 4,150
Default Re: Remington 3200

I still have VERY fond memories (and pics) of myself, my 3200 Field Gun (28" Mod/Full) at (River) Blind #11 McCormack Slough Unit Umatilla NWR, a limit a Greenheads w/my handloads of 1-3/8 oz. of Hard Lead #5s!

ALL of that's gone (except the 3200 :grin.

No more Blind #11

No more 1-3/8 oz. loads of Lead #5s!

What a killer combo!

(Always wanted a 3200 3" Field Gun)

__________________
(If you're doing it "right" you "talk to" Ducks!)
billc_sbio is offline   Reply With Quote
Old 12-24-2005, 07:39 PM   #8
snit
Tuna!
 
Join Date: Aug 2002
Location: Wenatchee, Wa
Posts: 1,411
Default Re: Remington 3200

Quote:
Thanks fellas. This might be a winner for me if this deal goes thru. Iíve been pretty much a K-gun shooter and I just couldnít remember the 3200 mod. If this is what I think it is, itís choked X-full/X-full and that will give Briley so much room to work with. It gets me excited thinking about it.
What lenght of barrels? 30's or 32's? If ya get it, post a pic!
__________________
...."the clock looked at me just like the devil in disguise".......
snit is offline   Reply With Quote
Old 12-25-2005, 11:48 AM   #9
Gun Rod Bow
 
Gun Rod Bow's Avatar
 
Join Date: Dec 2002
Location: Sherwood, OR
Posts: 10,369
Default Re: Remington 3200

Hey BB.

Why the interest in the 3200? Once you've been K-80, why go backwards?

__________________
Now Jeff wants to be like me
Gun Rod Bow is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Cast to



All times are GMT -8. The time now is 05:33 PM.

Terms of Service
Page generated in 1.93734 seconds with 29 queries