View Full Version : Source for aluminum diamond plate material?
OR 663 RD
11-04-2005, 12:30 PM
Looking for a piece that's 3 ft. x 3 ft., 1/8th inch thick. Needed for a boat project I'm working on. Any good (and cheap) sources out there?
duckboy
11-04-2005, 03:03 PM
I have a couple of pieces in my sled that need to be tacked down with a welder.
I think i might rather get them out and put in some marine grade plywood, only, i will need a piece that is big enough to lay in the back half. Will need to come from a piece that is bigger than an 8x4, becasue it exceeds 5 feet in length and width.
If you can hook me up with what i'm looking for, i'd give this stuff to you
Slugranch
11-08-2005, 06:22 AM
I always bought mine from Artisan Sheet Metal in Forest Grove, or from the fire truck manufacturer in Cornelius, Western States Fire Apparatus.
Birdman
11-08-2005, 07:15 PM
PM sent
t_birder
11-13-2005, 07:38 AM
Hey there,
If you can't find any in your area, let me know. I can cut it to sze for you if need be.
Good luck,
Clint
OR 663 RD
11-14-2005, 12:11 PM
t_birder,
Sent you a PM.
Chrome Bumper
11-18-2005, 11:08 AM
Call alaska Copper and brass and ask if they have a piece in the remanent bin.