Need help on trailer clunk

[takedown]

I have a dual axle baker trailer with surge brakes and the trailer clunks every time I take off from a dead stop. I have put a new actuator, etc. on it and it still occurs. Only occurs when I accelerate from a dead stop. Any ideas on how to fix the problem from you trailer pros? :bowdown:

Thanks in advance,

TD

[boater]

mine does the same thing, my brakes are out of adjustment and allowing the actuator to push to far in when i stop and when i take off i`m just pulling the slack out and it clunks. mine are 5 years old and going to replace them this winter.

[FishinMission]

Clint..Adjust your brakes up, and then check your fluid level in your resevoir.

Mark

[KChookem]

Also make sure the problem is not in the hitch ball (e.g. loose bolt, or the little flapper that locks down on the ball), or slack in the receiver componets.

[Rubber Boot]

What KC said......I thought I had a serious problem....It wound up to be a little slack in my reciever.