2004 Weldcraft Renegade 18'1" Inboard Jet

[Teton]

My wife is going to kill me for trying to sell our boat this summer, but its a good time to transition into something 7-8 feet bigger before the baby comes.

I'm putting this up to see if there is any interest this summer before hunting season rolls around. Otherwise, I'm going to run it another year.

Stats:

2004 Weldcraft Renegade
18' 1" Length
84" Beam
30" Sides
Marine Power 280 HP Inboard V-8 (Carbed Vortec 305) ~375 hrs
Raw/fresh cooling system
In-line mufflers
Marine Power MP901 Single stage jet
Tricker single axle swing-tongue trailer
Welded kicker bracket
Lockable rod storage
Lockable glove compartment
Barewest wakeboard tower (polished aluminum)
Full trailerable top
Side curtains
Rear drop curtain
Anchor nest
Icom VHF
Humminbird FF/Sounder
Forward running lights
Safety gear (pfds and fire extinguisher)
Black/grey upholstery
Swivel/folding front seats
Bench seats/storage boxes
Removable carpet over vinyl covered marine plywood floor
Forward mounted cooler
Motor box pad (matched to seats)
Bulkhead storage and floatation
Cabin heater
Full instrument cluster
Swim step
Integrated fuel connection for trolling motor
Panasonic stereo cd w/ 2 6x9 speakers
Recent tune up (plugs, wires, cap, rotor)
I hold title, and I am the only owner.

$22,500.00

Certified funds only; as is. Transferrable lifetime hull warranty (check with Weldcraft). I am located 1 mile from the river, and am happy to run the boat with you on a test drive. Its guaranteed fishy. :wink:

A few pics:

http://www.ifish.net/gallery/data/500/medium/2004_Weldcraft_Renegade_18.jpg


http://www.ifish.net/gallery/data/500/medium/OffWoodyIsland2.jpg




http://www.ifish.net/gallery/data/500/medium/Nov1192006_005.jpg

http://www.ifish.net/gallery/data/500/medium/Closing_Weekend_1-30-07_014b.jpg

http://www.ifish.net/gallery/data/500/Fish_Taya_Christy_Dave_Nehalem_Bay.JPG

http://www.ifish.net/gallery/data/500/medium/Sadie_Eddie_bored_in_the_boat.jpg

j

[Rauly]

Fishy and kills ducks too. This looks like a good deal guy's.

[fish_on]

Hey if your going to upsize I know a boat coming up for sale, all decked out for tuna ;)

[CATCH AND EAT]

This is one fishy boat. Personally been there done that. I am sure Dave will throw in his secret brine recipe with the purchase of the boat. Boat is in most excellent condition. Spent a lot of time on her this season and at $22k it is a bargain.

[Teton]

Hey if your going to upsize I know a boat coming up for sale, all decked out for tuna ;)

Dustin, I know that your boat is extremely fishy, and has the right stuff to do the job, but it is not 7-8 feet bigger than my Weldcraft. I also really want a hard top because...well, I don't know, but I really want one. :excited:

I have 7.5-footitis, not 3-footitis. :wink:

Thanks Rauly, I think you've seen a few posts on the hunting board with waterfowl draped on it.

[Teton]

This is one fishy boat. Personally been there done that. I am sure Dave will throw in his secret brine recipe with the purchase of the boat. Boat is in most excellent condition. Spent a lot of time on her this season and at $22k it is a bargain.

Bernie, not only is the boat fishy, but the guys I hand pick to fish for springers with me are fishy too. :D Except Hogmaster, I guess. :wink:

Maybe it was the hot boat rod mojo as well.

I will definitely include a brine recipie, but as I've said before, there's nothing secret to that brine. :wink:

I wish I had the money to keep this boat and size up too, but with a baby on the way, I can't have my cake and eat it too.

[CoonersShrimpboat]

Bernie, not only is the boat fishy, but the guys I hand pick to fish for springers with me are fishy too. :D Except Hogmaster, I guess. :wink:

Maybe it was the hot boat rod mojo as well.

I will definitely include a brine recipie, but as I've said before, there's nothing secret to that brine. :wink:

I wish I had the money to keep this boat and size up too, but with a baby on the way, I can't have my cake and eat it too.


Nice looking duck boat!

[Killertraylor]

Good Luck, Dave with your sale. You know that if you sell it quick (which you should), you've got plenty of rides on my 7 foot longer boat this summer.

[Teton]

Good Luck, Dave with your sale. You know that if you sell it quick (which you should), you've got plenty of rides on my 7 foot longer boat this summer.

Thanks brutha!! Just what I wanted to hear.

I'm going to pick up a little kickaround jet sled for duck hunting over the winter, and for springer season next year. If things work right, I'll place an order for a new bigger boat (or buy a used one) next spring.

[Teton]

Bump. The first calls didn't close.

[1pump]

Is that a 5-1/2' wide bottom or 6' ?

Are the Labs included? :D

[Teton]

Is that a 5-1/2' wide bottom or 6' ?

Are the Labs included? :D

72" 14-degree bottom. Same specs as a new one from Weldcraft: http://www.weldcraftmarine.com/18-20-renegade.php

The black labs are a fixture around the house. You'll have to buy the house to get the dogs. :wink:

[Teton]

I've found the right duckboat, so I put her up on CL. $500.00 discount to Ifishers applies.

http://portland.craigslist.org/clc/boa/738380385.html

[Teton]

Well, it was the wrong duckboat, but the Weldcraft is still for sale nonetheless.

[Skipper Cole]

I'll give ya a bump, sick boat, sick price.

[Teton]

Well, the Ifish rock bottom special price has expired on this boat.

I have placed the boat on the Boat Trader for $22,500.00 without the wakeboard tower and kicker.

The boat will go to a broker after the Boat Trader ad expires. Some tell me I priced it too low the first time, I tend to agree. Replacement cost is well into the 30s.

The new special Ifish price is now $22,000.00, but does not include the Yamaha trolling motor. If you do not want the wakeboard tower, and do want the kicker, we can negotiate.

[fishstik]

I ordered this same boat in 05 (except i have an outboard) This is one of the nicer riding boats you will ride in with a Weldcraft quality hull. I paid a little more than 36k for mine so this boat seems to be priced right!

[fish_on]

Bump

[flyfishingguy]

Bump
With all the posted replies, is the kicker for sale separately or not for sale at all?

[Teton]

With all the posted replies, is the kicker for sale separately or not for sale at all?

After I sell the boat, and if I don't negotiate a sale which includes the kicker if the purchaser wants, I will sell the kicker and/or the tower separately.

[Teton]

I ordered this same boat in 05 (except i have an outboard) This is one of the nicer riding boats you will ride in with a Weldcraft quality hull. I paid a little more than 36k for mine so this boat seems to be priced right!

Yep, my only complaint with it is that it isn't 24-25 feet long. :wink:

[Teton]

I have a serious potential buyer and his mechanic coming to view the boat and go for a ride Sunday.

$500 Ifish discount still applies.

[Meister Jäger]

I have a serious potential buyer and his mechanic coming to view the boat and go for a ride Sunday.

$500 Ifish discount still applies.

TTT, and hoping it's sold so Teton can pursue 'the perfect duck boat!' (and post pics of said waterfowling watercraft for all to see)

[Teton]

TTT, and hoping it's sold so Teton can pursue 'the perfect duck boat!' (and post pics of said waterfowling watercraft for all to see)

MJ, the potential buyer showed up, but hasn't contacted me since. To the boat broker she goes then. Had a tire-kicker show up this afternoon, but wasn't ready to deal either.

I've found the duck boat I want, but its in Wenatchee, WA. :passout: Its a mid-80s model Alumaweld 16.5' Super Vee with a 90 jet. Turnkey.

Wanna go for a drive? :wink:

This will also give me 6 months to put together a nice downpayment on a 24-footer too.

[Meister Jäger]

MJ, the potential buyer showed up, but hasn't contacted me since. To the boat broker she goes then. Had a tire-kicker show up this afternoon, but wasn't ready to deal either.

I've found the duck boat I want, but its in Wenatchee, WA. :passout: Its a mid-80s model Alumaweld 16.5' Super Vee with a 90 jet. Turnkey.

Wanna go for a drive? :wink:

This will also give me 6 months to put together a nice downpayment on a 24-footer too.

Bummer! Maybe the broker can git'r'gone for you?!

Sounds like a pretty good set up on the duck boat. I can even think of a few places where 'that boat'll hunt!':D (I'd be curious to ride in it too, having had thoughts about a 90 Jet on our 16' MM.) Keep me posted!

[Teton]

Bummer! Maybe the broker can git'r'gone for you?!

Sounds like a pretty good set up on the duck boat. I can even think of a few places where 'that boat'll hunt!':D (I'd be curious to ride in it too, having had thoughts about a 90 Jet on our 16' MM.) Keep me posted!

MJ, dropped it off at Brown's Landing this a.m. Hope to get it sold by the end of Sept.

I'll be picking up the duck boat after the OTC next weekend, and fiddling with it until the opener. Not much to do it appears. You are definitely welcome to ride with me anytime.

[Teton]

Yep, she is at the dealership awaiting sale.

Financing is available through them.

http://www.brownslanding.com/pre_owned_detail.asp?sid=05959589X8K18K2008J1I18I5 7JPMQ3207R0&veh=953486

Donation to Ifish if an ifisher buys it.

[bigfishaddiction]

Not too bad, they only priced it $5,000.00 past what your lowest price ever went down to. It should really sell fast now!!! :applause: HMMMM???

[Teton]

Not too bad, they only priced it $5,000.00 past what your lowest price ever went down to. It should really sell fast now!!! :applause: HMMMM???

bfa, you think it was priced too high before, or now?:flowered: I can't tell. :wink:

Like I wrote before, I priced it WELL below market initially, for an Ifish quick sale. No one picked it up, so it eventually went to a broker. And, as I wrote before, the price goes up when a broker gets a hold of it.

Besides, for as many fish as this boat has killed, the additional $5k is a bargain!! :D

If someone is serious though, and wants to purchase it at the old Ifish price (with a donation to Ifish), they can always PM me, and I can retrieve the boat from the broker, for a small fee. I am fully willing to negotiate a fair price. The boat is paid for, and I am not in dire need of dumping it to get out from under a payment. The broker, however, must cover his costs of doing business at market prices.

[Teton]

Back up.

Thought we had it sold a couple of times at a broker. Oh well.

Rock bottom Ifish price applies to Ifishers, with a donation to the Board as well.

[Teton]

Thought about keeping it, then rethought. I've got to get this boat sold so the order on my next one can go in.

It sits at Brinsfield Boat Basin with a new price:

$22,950.00.

Donation to Ifish if an Ifisher buys it. Springer season is right around the corner (its a springer magnet). :D

[Teton]

Springer brine is included. :D

[Teton]

Financing is available at Brinsfield.

All reasonable offers will be considered, and the price is negotiable.

[Teton]

Back to the top. Springer season is set. Do you need a springer boat?

Probably will pull the boat from Brinsfield's soon, as they haven't done the job.

Will likely go back to my friend Pat at Clemens soon to see what he can do.

Until then all serious offers will be considered.

[Teton]

I will be pulling the boat from brokerage soon. Price goes down a couple of thousand while I have the boat until I put it back on consignment with another dealer.

That is, 2,000.00 off the Ifish price of $22,500 (not what they have it up for at Brinsfield).

$20,500.00 until I put it back on consignment. I have too many boats.