Pulling the 2 stroke and putting on a 4

[EULACHON]

I am pulling the Mariner kicker off my sled and putting on a new 4 stroke yamaha.

My boat has an autoblend system and I am wondering where to plumb the new kicker in (Can't use old hose as it is hooked to the autoblender)

I plan to just leave the old hose hooked to the autoblender.

Should I just T in after the water seperator?? for the new hose

Thanks all......the guy is coming from LaGrande for thr old kicker so now I can hang the Yamaha !!!

Paul

[Boatdog]

Some fuel water seperators have more than one 'output' connection already built into them. It's worth a look. You may need to punch out (or remove) the second plug. Then install the new hose and fitting directly onto the F-W-S.

If it doesn't, putting in a T after the F-W-S works also.

Make sure you have a check valve between your kicker and the F-W-S, so the big motor doesn't suck fuel from the kicker. (you probably will have the pump ball/check valve assembly anyways).