Headgasket failed

[fishncliff]

I recently blew the head gasket in my Yota. :passout:
I took it apart. There is no water in the oil, on the head or in the filter. :yay:
There is oil in the radiator and all through the cooling system. :bigshock:
How does one go about cleaning this out? :whazzup: :pray:

[Boat Doc']

I would guess flushing the system after it gets to operating temp. Anybody else?

[MattPark]

I have used Tide and detergents like that with good success. You will need to do it a few times, but it will come clean. Make sure you get it hot, and make sure you drain it hot, but don't burn yourself.

[fishncliff]

Thanks for the info. I've been pondering what to use to cut the oil.

[wwjetboater]

I found Dawn works the best